Organocatalyzed Hydroacylation of Enones by Photosensitization of Acyl Silanes.

A mild protocol for hydroacylation of enones through photosensitization of acyl silanes with thioxanthone under blue light (455 nm) irradiation is reported. A Brønsted acid is used as a co-catalyst in the reaction. The versatility of the method is demonstrated through inter- and intramolecular hydroacylation reaction. The hydroacylation product is applied for synthesizing an anti-HCV agent. Mechanistic insights are also provided through control experiments.

Positive profile of natural small molecule organic matters on emerging antivirus pharmaceutical elimination in advance reduction process: A deep dive into the photosensitive mechanism of triplet excited state compounds.

Natural small molecular organic matter (NSOM), ubiquitous in natural waters and distinct from humic acid or fulvic acid, is a special type of dissolved organic matter (DOM) which is characterized as strong photosensitivity and simple molecular structure. However, little study had been directed on the role of NSOM in eliminating emerging contaminants in advanced reduction process (ARP). This study took three small molecular isomeric organic acids (p-hydroxybenzoic acid, pHBA; salicylic acid, SA; m-hydroxybenzoic acid, mHBA) as the representative substances of NSOM to explore these mechanisms on promoting Ribavirin (RBV, an anti COVID-19 medicine) degradation in ultraviolet activated sulfite (UV/Sulfite) process. The results demonstrated that the observed degradation rate constant of RBV (kobs-RBV) was 7.56 × 10-6 s-1 in UV/Sulfite process, indicating that hydrated electron (eaq-) from UV/Sulfite process could not effectively degrade RBV, while it increased by 178 and 38 times when pHBA and SA were introduced into UV/Sulfite process respectively, suggesting that pHBA and SA strongly promoted RBV degradation while mHBA had no promotion on RBV abatement in UV/Sulfite process. Transient absorption spectra and reactive intermediates scavenging experiment indicated that the triplet excited state pHBA and SA (3pHBA* and 3SA*) contributed to the degradation of RBV through non-radical process. Notably, eaq- played the role of key initiator in transforming pHBA and SA into their triplet states. The difference of kobs-RBV in UV/Sulfite/pHBA and UV/Sulfite/SA process was attributed to different generation pathways of 3pHBA* and 3SA* (high molar absorptivity at the wavelength of 254 nm and photosensitive cycle, respectively) and their second order rate constants towards RBV (kRBV-3pHBA* = 8.60 × 108 M-1 s-1 and kRBV-3SA* = 6.81 × 107 M-1 s-1). mHBA could not degrade RBV for its lack of intramolecular hydrogen bond and low molar absorptivity at 254 nm to abundantly transform into its triplet state. kobs-RBV increased as pH increased from 5.0 to 11.0 in UV/Sulfite/SA process, due to the high yield of eaq- in alkaline condition which promoted the generation of 3SA* and the stable of the absorbance of SA at 254 nm. By contrast, kobs-RBV underwent a process of first increasing and then decreasing in UV/Sulfite/pHBA process as the increase of pH, and its highest value achieved in a neutral condition. This lied in the exposure of eaq- increased as the increase of pH which promoted the generation of 3pHBA*, while the molar absorptivity of pHBA at 254 nm decreased as the increase of pH in an alkaline condition which inhibited the yield of 3pHBA*. The RBV degradation pathways and products toxicity assessment indicated that UV/Sulfite/pHBA had better detoxification performance on RBV than UV/Sulfite/SA process. This study disclosed a novel mechanism of emerging contaminants abatement through non-radical process in NSOM mediated ARP, and provide a wide insight into positive profile of DOM in water treatment process, instead of only taking DOM as a quencher of reactive intermediates.

Aqueous-Phase Photoreactions of Mixed Aromatic Carbonyl Photosensitizers Yield More Oxygenated, Oxidized, and less Light-Absorbing Secondary Organic Aerosol (SOA) than Single Systems.

Aromatic carbonyls have been mainly probed as photosensitizers for aqueous secondary organic aerosol (aqSOA) and light-absorbing organic aerosol (i.e., brown carbon or BrC) formation, but due to their organic nature, they can also undergo oxidation to form aqSOA and BrC. However, photochemical transformations of aromatic carbonyl photosensitizers, particularly in multicomponent systems, are understudied. This study explored aqSOA formation from the irradiation of aromatic carbonyl photosensitizers in mixed and single systems under cloud/fog conditions. Mixed systems consisting of phenolic carbonyls only (VL + ActSyr + SyrAld: vanillin [VL] + acetosyringone [ActSyr] + syringaldehyde [SyrAld]) and another composed of both nonphenolic and phenolic carbonyls (DMB + ActSyr + SyrAld: 3,4-dimethoxybenzaldehyde [DMB], a nonphenolic carbonyl, + ActSyr + SyrAld) were compared to single systems of VL (VL*) and DMB (DMB*), respectively. In mixed systems, the shorter lifetimes of VL and DMB indicate their diminished capacity to trigger the oxidation of other organic compounds (e.g., guaiacol [GUA], a noncarbonyl phenol). In contrast to the slow decay and minimal photoenhancement for DMB*, the rapid photodegradation and significant photoenhancement for VL* indicate efficient direct photosensitized oxidation (i.e., self-photosensitization). Relative to single systems, the increased oxidant availability promoted functionalization in VL + ActSyr + SyrAld and accelerated the conversion of early generation aqSOA in DMB + ActSyr + SyrAld. Moreover, the increased availability of oxidizable substrates countered by stronger oxidative capacity limited the contribution of mixed systems to aqSOA light absorption. This suggests a weaker radiative effect of BrC from mixed photosensitizer systems than BrC from single photosensitizer systems. Furthermore, more oxygenated and oxidized aqSOA was observed with increasing complexity of the reaction systems (e.g., VL* < VL + ActSyr + SyrAld < VL + ActSyr + SyrAld + GUA). This work offers new insights into aqSOA formation by emphasizing the dual role of organic photosensitizers as oxidant sources and oxidizable substrates.

Highways and Detours in the Realm of Photodynamic Therapy.

Photodynamic therapy (PDT) has been a topic of interest since the first report in 1900 but has yet to become a 'mainstream' treatment protocol in the medical field. There are clear indications for which PDT might be the 'method of choice', but it is unlikely that there will be protocols for the treatment of systemic disease. This report discusses recent developments for promoting PDT efficacy, in the context of what is already known. Factors that can limit the scope of these applications are also indicated. Among the more interesting of these developments is the use of formulation techniques to target specific organelles for photodamage. This can enhance responses to PDT and circumvent situations where an impaired death pathway interferes with PDT efficacy.

Carbon-TiO2 Hybrid Quantum Dots for Photocatalytic Inactivation of Gram-Positive and Gram-Negative Bacteria.

Carbon-semiconductor hybrid quantum dots are classical carbon dots with core carbon nanoparticles doped with a selected nanoscale semiconductor. Specifically, on those with the nanoscale TiO2 doping, denoted as CTiO2-Dots, their synthesis and thorough characterization were reported previously. In this work, the CTiO2-Dots were evaluated for their visible light-activated antibacterial function, with the results showing the effective killing of not only Gram-positive but also the generally more resistant Gram-negative bacteria. The hybrid dots are clearly more potent antibacterial agents than their neat carbon dot counterparts. Mechanistically, the higher antibacterial performance of the CTiO2-Dots is attributed to their superior photoexcited state properties, which are reflected by the observed much brighter fluorescence emissions. Also considered and discussed is the possibility of additional contributions to the antibacterial activities due to the photosensitization of the nanoscale TiO2 by its doped core carbon nanoparticles.

Photogeneration and quenching of singlet molecular oxygen by bacterial C40 carotenoids with long chain of conjugated double bonds.

Measurement of photosensitized luminescence of singlet oxygen has been applied to studies of singlet oxygen generation and quenching by C40 carotenoids (neurosporene, lycopene, rhodopin, and spirilloxanthin) with long chain of conjugated double bonds (CDB) using hexafluorobenzene as a solvent. It has been found that neurosporene, lycopene, and rhodopin are capable of the low efficient singlet oxygen generation in aerated solutions upon photoexcitation in the spectral region of their main absorption maxima. The quantum yield of this process was estimated to be (1.5-3.0) × 10-2. This value is near the singlet oxygen yields in solutions of ζ-carotene (7 CDB) and phytoene (3 CDB) and many-fold smaller than in solutions of phytofluene (5 CDB) (Ashikhmin et al. Biochemistry (Mosc) 85:773-780, https://doi.org/10.1134/S0006297920070056 , 2020, Biochemistry (Mosc) 87:1169-1178, 2022, https://doi.org/10.1134/S00062979221001082022 ). Photogeneration of singlet oxygen was not observed in spirilloxanthin solutions. A correlation was found between the singlet oxygen yields and the quantum yields and lifetimes of the fluorescence of the carotenoid molecules. All carotenoids were shown to be strong physical quenchers of singlet oxygen. The rate constants of 1O2 quenching by the carotenoids with long chain of CDB (9-13) were close to the rate constant of the diffusion-limited reactions ≈1010 M-1 s-1, being many-fold greater than the rate constants of 1O2 quenching by the carotenoids with the short chain of CDB (3-7) phytoene, phytofluene, and ζ-carotene studied in prior papers of our group (Ashikhmin et al. 2020, 2022). To our knowledge, the quenching rate constants of rhodopin and spirilloxanthin have been obtained in this paper for the first time. The mechanisms of 1O2 photogeneration by carotenoids in solution and in the LH2 complexes of photosynthetic cells, as well as the efficiencies of their protective action are discussed.

Ketoprofen products induced photosensitization of sulfonamide antibiotics: The cocktail effects of pharmaceutical mixtures on their photodegradation.

Indirect photolysis induced by naturally occurring sensitizers constitutes an important pathway accounting for the transformation and fate of many recalcitrant micropollutants in sunlit surface waters. However, the photochemical transformation of micropollutants by photosensitizing pharmaceuticals has been less investigated. In this study, we demonstrated that the non-steroidal anti-inflammatory drug ketoprofen (KTF) and its photoproducts, 3-acetylbenzophenone (AcBP) and 3-ethylbenzophenone (EtBP), could sensitize the photodegradation of coexisting sulfonamide antibiotics, e.g., sulfamethoxazole (SMX), under artificial 365 nm ultraviolet (UV) and sunlight irradiation. Key reactive species including triplet excited state and singlet oxygen (1O2) responsible for photosensitization were identified by laser flash photolysis (LFP) and electron paramagnetic resonance (EPR) techniques, respectively. High-resolution mass spectrometry (HRMS) and structure-related reactivity analyses revealed that the sensitized photolysis of SMX occurred mainly through single electron transfer. The rate constants of sulfonamides sensitized by AcBP photolysis followed the order of sulfisoxazole (SIX)＞sulfathiazole (STZ)＞SMX＞sulfamethizole (SMT). Exposure to sunlight also enhanced the photolysis of SMX in the presence of KTF or AcBP, and water matrix had limited impact on such process. Overall, our results reveal the feasibility and mechanistic aspects of photosensitization of coexisting contaminants by pharmaceuticals (or their photoproducts) and provide new insights into the cocktail effects of pharmaceutical mixtures on their photochemical behaviors in aqueous environment.

BODIPY-fused uracil: synthesis, photophysical properties, and applications.

Fluorescent nucleobase and nucleic acid analogs are important tools in chemical and molecular biology as fluorescent labelling of nucleobases has applications in cellular imaging and anti-tumor activity. Boron-dipyrromethene (BODIPY) dyes exhibiting high brightness and good photostability are extensively used as fluorescent labelling agents and as type II photosensitizers for photodynamic therapy. Thus, the combination of nucleobases and BODIPY to obtain new compounds with both anti-tumor activity and fluorescent imaging functions is the focus of our research. We synthesized two new nucleobase analogs 1 and 2 by fusing the BODIPY core directly with uracil which resulted in favorable photophysical properties and high emission quantum efficiencies particularly in organic solvents. Further, we explored the newly synthesized derivatives, which possessed good singlet oxygen generation efficiencies and bio-compatibility, as potential PDT agents and our results show that they exhibit in vitro anti-tumor activities.

Riboflavin (vitamin B2) sensitized photooxidation of ascorbic acid (vitamin C): A kinetic study.

Ascorbic acid (AH2) photoxidation sensitized by riboflavin (RF) has been studied between pH 2.0 and 12.0 in ambient air and anaerobic environment using UV and visible irradiation sources. The kinetics of AH2 degradation in aqueous medium along with RF is found to be first-order for its photodegradation. AH2 photolysis rate constants in aerobic and anaerobic conditions with RF (1.0-5.0 × 10-5 M) are 0.14-3.89 × 10-2 and 0.026-0.740 × 10-2 min-1, respectively. The rate constants (k2) of second-order kinetics for AH2 and RF photochemical interaction in aerobic and anaerobic conditions are in the range of 0.24-3.70 to 0.05-0.70 × 10-3 M-1 min-1, respectively, which manifests that increasing the RF concentration also increases the rate of photodegradation (photooxidation) of AH2. The k2 versus pH graph is bell-shaped which indicates that increasing the pH increases photolytic degradation rate of AH2 with RF. Increasing the pH results in the increased ionization of AH2 (ascorbyl anion, AH-) and redox potential which leads to the higher rates of photodegradation of AH2. Two-component spectrophotometric (243 and 266 nm, AH2 and RF, respectively) and high-performance liquid chromatography (HPLC) methods have been used to determine the concentration of AH2 and RF in pure and degraded solutions. The results obtained from these two methods are compared using a student t-test which showed no noteworthy difference between them.

Antiviral activity of porphyrins and porphyrin-like compounds against tick-borne encephalitis virus: Blockage of the viral entry/fusion machinery by photosensitization-mediated destruction of the viral envelope.

Tick-borne encephalitis virus (TBEV), the causative agent of tick-borne encephalitis (TBE), is a medically important flavivirus endemic to the European-Asian continent. Although more than 12,000 clinical cases are reported annually worldwide, there is no anti-TBEV therapy available to treat patients with TBE. Porphyrins are macrocyclic molecules consisting of a planar tetrapyrrolic ring that can coordinate a metal cation. In this study, we investigated the cytotoxicity and anti-TBEV activity of a large series of alkyl- or (het)aryl-substituted porphyrins, metalloporphyrins, and chlorins and characterized their molecular interactions with the viral envelope in detail. Our structure-activity relationship study showed that the tetrapyrrole ring is an essential structural element for anti-TBEV activity, but that the presence of different structurally distinct side chains with different lengths, charges, and rigidity or metal cation coordination can significantly alter the antiviral potency of porphyrin scaffolds. Porphyrins were demonstrated to interact with the TBEV lipid membrane and envelope protein E, disrupt the TBEV envelope and inhibit the TBEV entry/fusion machinery. The crucial mechanism of the anti-TBEV activity of porphyrins is based on photosensitization and the formation of highly reactive singlet oxygen. In addition to blocking viral entry and fusion, porphyrins were also observed to interact with RNA oligonucleotides derived from TBEV genomic RNA, indicating that these compounds could target multiple viral/cellular structures. Furthermore, immunization of mice with porphyrin-inactivated TBEV resulted in the formation of TBEV-neutralizing antibodies and protected the mice from TBEV infection. Porphyrins can thus be used to inactivate TBEV while retaining the immunogenic properties of the virus and could be useful for producing new inactivated TBEV vaccines.

Heterogeneous photosensitization for water reuse in cellars: evaluation of silica, spongin, and chitosan as carrier material.

Photosensitization, a powerful oxidation reaction, offers significant potential for wastewater treatment in the context of industrial process water reuse. This environmentally friendly process can be crucial in reducing water consumption and industrial pollution. The ultimate goal is to complete process water reuse, creating a closed-loop system that preserves the inherent value of water resources. The photosensitized oxidation reaction hinges on three essential components: the photosensitizer, visible light, and oxygen. In this study, we assess the performance of three distinct materials-silica, chitosan, and spongin-as carrier materials for incorporating the phthalocyanine photosensitizer (ZnPcS4) in the heterogenous photosensitization process. Among the three materials under study, chitosan emerged as the standout performer in reactor hydrodynamic performance. In the photooxidation process, the photosensitizer ZnPcS4 exhibited notable efficacy, resulting in a significant reduction of approximately 20 to 30% in the remaining COD concentration of the cellar wastewater. Chitosan demonstrated exceptional hydrodynamic characteristics and displayed a favorable response to pH adjustments within the range of 8 to 10, outperforming the other two carrier materials. To further enhance the efficiency of continuous operation, exploring methods for mitigating photosensitizer bleaching within the reaction medium and investigating the impact of different pH values on the process optimization would be prudent.

Freezing-Enhanced Photoreduction of Iodate by Fulvic Acid.

Iodate is a stable form of iodine species in the natural environment. This work found that the abiotic photosensitized reduction of iodate by fulvic acid (FA) is highly enhanced in frozen solution compared to that in aqueous solution. The freezing-induced removal of iodate by FA at an initial pH of 3.0 in 24 h was lower than 10% in the dark but enhanced under UV (77.7%) or visible light (31.6%) irradiation. This process was accompanied by the production of iodide, reactive iodine (RI), and organoiodine compounds (OICs). The photoreduction of iodate in ice increased with lowering pH (pH 3-7 range) or increasing FA concentration (1-10 mg/L range). It was also observed that coexisting iodide or chloride ions enhanced the photoreduction of iodate in ice. Fourier transform ion cyclotron resonance mass spectrometric analysis showed that 129 and 403 species of OICs (mainly highly unsaturated and phenolic compounds) were newly produced in frozen UV/iodate/FA and UV/iodate/FA/Cl- solution, respectively. In the frozen UV/iodate/FA/Cl- solution, approximately 97% of generated organochlorine compounds (98 species) were identified as typical chlorinated disinfection byproducts. These results call for further studies of the fate of iodate, especially in the presence of chloride, which may be overlooked in frozen environments.

Construction of Embedded Sulfur-Doped g-C3 N4 /BiOBr S-Scheme Heterojunction for Highly Efficient Visible Light Photocatalytic Degradation of Organic Compound Rhodamine B.

Constructing S-scheme heterojunction catalysts is a key challenge in visible-light catalysed degradation of organic pollutants. Most heterojunction materials are reported to face significant obstacles in the separation of photogenerated electron-hole pairs owing to differences in the material size and energy barriers. In this study, sulfur-doped g-C3 N4 oxidative-type semiconductor materials are synthesized and then coupled with BiOBr reductive-type semiconductor to form S-g-C3 N4 /BiOBr S-scheme heterojunction. A strong and efficient internal electric field is established between the two materials, facilitating the separation of photogenerated electron-hole pairs. Notably, in situ XPS proved that after visible light irradiation, Bi3+ is converted into Bi(3+ɑ)+ , and a large number of photogenerated holes are produced on the surface of BiOBr, which oxidized and activated H2 O into •OH.  â€¢OH cooperated with •O2 - and 1 O2 to attack Rhodamine B (RhB) molecules to achieve deep oxidation mineralization. The composite material is designed with a LUMO energy level higher than that of RhB, promoting the sensitization of RhB by injecting photogenerated electrons into the heterojunction, thereby enhancing the photocatalytic performance to 22.44 times that of pure g-C3 N4 . This study provides a new perspective on the efficient degradation of organic molecules using visible light catalysis.

Second Generation of Near-Infrared Cyanine-Based Photocatalysts for Faster Organic Transformations.

A second generation of cyanine-based near-infrared photocatalysts has been developed to accelerate organic transformations. Cyanines were prepared and fully characterized prior to evaluation of their photocatalytic activities. Catalyst efficiency was determined by using two model oxidation and reduction reactions. For the aza-Henry reaction, cyanines bearing an amino group on the heptamethine chain led to the best results. For trifluoromethylation, the stability of the photocatalyst was found to be the key parameter for efficient and rapid conversion.

Photo-induced protein modifications: a range of biological consequences and applications.

Proteins are the most abundant biomolecules in living organisms and tissues and are also present in many natural and processed foods and beverages, as well as in pharmaceuticals and therapeutics. When exposed to UV-visible light, proteins containing endogenous or exogenous chromophores can undergo direct and indirect photochemical processes, resulting in protein modifications including oxidation of residues, cross-linking, proteolysis, covalent binding to molecules and interfaces, and conformational changes. When these modifications occur in an uncontrolled manner in a physiological context, they can lead to biological dysfunctions that ultimately result in cell death. However, rational design strategies involving light-activated protein modification have proven to be a valuable tool for the modulation of protein function or even for the construction of new biomaterials. This mini-review describes the fundamentals of photochemical processes in proteins and explores some of their emerging biomedical and nanobiotechnological applications, such as photodynamic therapy (PDT), photobonding for wound healing, photobioprinting, photoimmobilization of biosensors and enzymes for sensing, and biocatalysis, among others.

Validation of quenching effectiveness and pollutant degradation ability of singlet oxygen through model reaction system.

Quenching method is widely used to assess the contribution of specified reactive species through the probe inhibition efficiency (IE) caused by adding excessive quencher. However, for reactive species with weak ability such as singlet oxygen (1O2), the quenching results are prone to ambiguity. In this study, an 1O2 system using furfuryl alcohol (FFA) as a probe was successfully constructed by methylene-blue-N vis-photosensitization, to discuss the quenching, interference elimination and pollutant degradation ability of 1O2. Inhibition of FFA transformation caused by both quenching and interrupting of 1O2 production was found. The quenching is affected by quencher dosage and ability, which depends on the second-order-rate constant (k). A high k means a strong ability, and less dosage is required to achieve the same IE. Comparison between the calculated ratio of reactive species consumed by quencher and experimental IE helps to judge the interruption of 1O2 production. None of the organic-solvents (methanol, ethanol, iso-propanol, n-butanol, iso-butanol, tert-butanol, tetrahydrofuran, acetonitrile, acetone and chloroform) scavenged 1O2, which would be used as screening-agent for other reactive species (e.g., hydroxyl radicals) that would interrupt 1O2 contribution assessment. Besides, 1O2 was powerless to degrade most selected pollutants. These results encourage proper use of quenchers and better experimental design.

PhotoSENSIL-18 assay development: Enhancing the safety testing of cosmetic raw materials and finished products to support the in vitro photosensitization assessment?

Although photosensitization remains a major toxicological endpoint for the safety assessment of cosmetic products and their raw materials, there is no validated in vitro method available for the evaluation of this adverse effect so far. Given that previous studies have proposed that the Interleukine-18 (IL-18) plays a key role in keratinocyte-driven pro-inflammatory responses specific of the skin sensitization process, we hypothesize that IL-18 might be used as a specific biomarker for in vitro photosensitization assessment. The aim of the present study was the set-up of a new in vitro assay using IL-18 as a biomarker for the identification of photosensitizers in a reconstructed human epidermis (RHE) model. EpiCS™ RHE were incubated with a set of 16 known sensitising / phototoxic / photosensitizing substances and exposed to ultra-violet (UV) irradiation. Then, the cell viability was analysed by MTT assay, while the IL-18 secretion was quantified by ELISA. Preliminary assays have shown that 1 h of incubation followed by a recovery period of 23 h induced the highest IL-18 production in response to UV exposure. This protocol was used to test 16 substances and a ratio of IL-18 production (UV+/UV- ratio) was then generated. Our data shows that the cut-off of 1.5 (UV+/UV- ratio) is the most predictive model among the tested conditions, being capable of identifying true positive photosensitizers (8 of 9) with a good prediction in comparison with in vivo data. In a nutshell, our data suggests that the PhotoSENSIL-18 is a promising in vitro method for identification of photosensitizing substances. Although further studies are necessary to optimize the model, we foresee that the PhotoSENSIL-18 assay can be used in the context of an Integrative Approach to Testing and Assessment (IATA) of chemicals.

Zebrafish thrombosis models according to the location of thrombus formation.

Background: Ischemic stroke becomes a major cause of death and disability. It can develop due to intravascular or cardiac thromboemboli. Animal models that reflect diverse stroke mechanisms remain under development. Using photochemical thrombosis, we developed a feasible zebrafish model according to the thrombus location (intracerebral vs. intracardiac). We validated the model using real-time imaging and thrombolytic agent. Methods: We used transgenic zebrafish larvae (flk:gfp), which express specific fluorescence in endothelial cells. We injected Rose Bengal, a photosensitizer as a mixture of photosensitizer, and a fluorescent agent into the cardinal vein of the larvae. We then evaluated real-time thrombosis in vivo by inducing thrombosis through exposure to a confocal laser (560 nm) and staining the blood flow (RITC-dextran). We validated intracerebral and intracardiac thrombotic models with checking the activity of tissue plasminogen activator (tPA). Results: The photochemical agent induced the formation of intracerebral thrombi in transgenic zebrafish. Real-time imaging techniques confirmed the formation of the thrombi. The damage and apoptosis of the vessel's endothelial cells were seen in the in vivo model. An intracardiac thrombosis model was developed by the same method using photothrombosis, and the model was validated through thrombolysis by tPA. Conclusions: We developed and validated two zebrafish thrombosis models that are readily available, cost-effective, and intuitive for assessing the efficacy of thrombolytic agents. These models can be used for a broad spectrum of future studies, such as screening and efficacy assessment of new antithrombotic agents.

Sulfate Formation by Photosensitization in Mixed Incense Burning-Sodium Chloride Particles: Effects of RH, Light Intensity, and Aerosol Aging.

Elevated particulate sulfate concentrations have been frequently observed in coastal areas when air masses are influenced by continental emissions, especially combustion sources like biomass burning. We studied the SO2 uptake by laboratory-generated droplets containing incense smoke extracts and sodium chloride (IS-NaCl) under irradiation and found enhanced sulfate production over pure NaCl droplets, attributable to photosensitization induced by constituents in IS. Low relative humidity and high light intensity facilitated sulfate formation and increased the SO2 uptake coefficient by IS-NaCl particles. Aging of the IS particles further enhanced sulfate production, attributable to the enhanced secondary oxidant production promoted by increased proportions of nitrogen-containing CHN and oxygen- and nitrogen-containing CHON species under light and air. Experiments using model compounds of syringaldehyde, pyrazine, and 4-nitroguaiacol verified the enhancements of CHN and CHON species in sulfate formation. This work provides experimental evidence of enhanced sulfate production in laboratory-generated IS-NaCl droplets via enhanced secondary oxidant production triggered by photosensitization in multiphase oxidation processes under light and air. Our results can shed light on the possible interactions between sea salt and biomass burning aerosols in enhancing sulfate production.

Creation and Plasmon-Assisted Photosensitization of Annealed Z-Schemes for Sunlight-Only Water Splitting.

Solely light-induced water splitting represents a promising avenue for a carbon-free energy future, based on reliable energy sources. Such processes can be performed using coupled semiconductor materials (the so-called direct Z-scheme design) that facilitate spatial separation of (photo)excited electrons and holes, prevent their recombination, and allow water-splitting half-reactions proceeding at each corresponding semiconductor side. In this work, we proposed and prepared a specific structure, based on WO3g-x/CdWO4/CdS coupled semiconductors, created by annealing of a common WO3/CdS direct Z-scheme. WO3-x/CdWO4/CdS flakes were further combined with a plasmon-active grating for the creation of the so-called artificial leaf design, making possible complete utilization of the sunlight spectrum. The proposed structure enables water splitting with high production of stoichiometric amounts of oxygen and hydrogen without undesirable catalyst photodegradation. Several control experiments confirm the creation of electrons and holes participating in the water splitting half-reaction in a spatially selective manner.